HVAC Copper Tube Aluminium Fin Condenser Evaporator Coil Heat Exchanger

Product Description

Product Description

Use the Water to Air Heat Exchanger - 16 inch x 20 inch - HTL1620  with Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.
Designed to be added into existing or new duct work - adds hot water space heating for new or existing water heaters or hot water boilers. Inlet and outlet connections are 1" diameter copper supply and return piping. Inside diameter for connections is 1 inch - outside diameter is 1 1/8 inches 1/2 Inch duct flange for mounting.


A - 16 Inches / B - 20 Inches / C - 3.5 Inches / D - 11.5 Inches
 
The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger

Drawing:


Different size, Customized according to client's requirements:

Item	Btu	CFM	Pressure Drop Air	Pressure Drop Water	GPM
12x12	50,000	700	0.5	0.2	6
12x18	80,000	800	0.5	0.2	6
14x14	85,000	800	0.5	0.2	7
14x18	95,000	800	0.5	0.2	7
15x15	98,000	1000	0.51	0.206	8
16x16	90,000	1250	0.51	0.257	8
16x18	100,000	1650	0.81	0.254	10
18x18	130,000	2000	0.91	0.325	12
18x20	140,000	2350	1.32	0.359	14
19x20	150,000	2500	1.49	0.388	15
20x20	160,000	2700	1.38	0.4	16

Packing details:

Low Temperature Cold Room air cooler evaporator

condensing unit air cooled copper fin condenser with fan

Made of copper pipe & alu.fin 
Widely used in freezer,cold room,condensing unit

Dimension could be different according to request.

1. Specification

1. Raw Material : copper tube , aluminium fin , galvanized plate and stainless steel plate
2. Size of copper pipe: diameter:7mm, 7.94mm, 9.52mm ,Inner Grooved Or smooth tube .
3. Aluminum foil : Hydrophilic or bare
4. Fin type :Louver Fin , Flat fin , corrugated fin 
5. Pitch of fins can be adjusted between 1.8-5.8mm
6. Pitch of holes and pitch of rows:25x21.65mm,19.05x12.7mm,25.4x22mm .
7. no less than 3.0mpa air pressure (nitrogen)leak test
8. Different alternative fan available: micro fan, shaded pole or outer rotor fan motor
9. We can offer customized service as well
10. Suitable for R134a, R22, R404a, R407c, refrigerant etc…

If you have any interest, pls feel free to contact with us at any time.

Sunny

 

2. Main products:




3. Exhibition